Front Ports

Front ports are pass-through ports which represent physical cable connections that comprise part of a longer path. For example, the ports on the front face of a UTP patch panel would be modeled in NetBox as front ports. Each port is assigned a physical type, and must be mapped to one or more rear port positions on the same device. A single rear port may be mapped to multiple front ports, using numeric positions to annotate the specific alignment of each.

Tip

Like most device components, front ports are instantiated automatically from front port templates assigned to the selected device type when a device is created.

Fields

Device

The device to which this port belongs.

Module

The installed module within the assigned device to which this port belongs (optional).

Name

The port's name. Must be unique to the parent device.

Label

An alternative physical label identifying the port.

Type

The port's termination type.

Positions

The number of rear port positions to which this front port maps. For a front port which passes through to a single rear port position, set this to 1.

Rear Ports

The rear port and position to which this front port maps.

Tip

When creating multiple front ports using a patterned name (e.g. Port [1-12]), select one rear port-position mapping for every position of every front port being created. For example, 12 front ports with two positions each requires 24 mappings, which are assigned to the generated ports in order.

Color

The port's color (optional).

Mark Connected

If selected, this component will be treated as if a cable has been connected.